North Falcon Magnetostrictive Level Probes

North Falcon magnetostrictive level probes (wired and wireless level probes) are intended for continuous measurement of petroleum products levels (fuel and LPG), produced water level and temperature in tanks at petrol stations, tank farms and refineries. Probes are supplied with length up to 15 m in wired and wireless executions. Also, flexible version of the probes for high tanks is available. North Falcon NF RS - wired magnetostrictive intrinsically safe level gauge # General features The magnetostrictive level probe bases his physical phenomena on the Wiedemann effect. The main features are: Very high accuracy and repeatability Reliability and robustness Sharp leakage control Full stainless steel execution Ultra compact design Commonly used in the fuel level control, it allows the measure of the three essential parameters: Fuel level Water level on the bottom of the tank Fuel temperature The magnetostrictive sensor measures with an high resolution of 0,01 mm and a final accuracy of 0,25 mm on the full scale range (Plus version only). Measuring length of the NF rigid pipe, range from 0,4 m up to 5,5 m Measuring length of the NF flexible pipe, range from 5,5 m up to 15 m Mechanical characteristics Stainless steel enclosure AISI 304 – Ø 42/35 mm IP 68 Protection up to 10 m/24h water submersion Tank connection: in riser, threaded or flanged Stainless steel pipe AISI 316 Ø 14.0 mm N. 2 INOX AISI 316 / NBR floats Ø 42 / 52 mm Electrical features Intrinsically safe circuit to be connected to the passive barrier ISB Circular connector M12 – 4 pin polarized 2 m fuel resistant cable type CEI EN 50363 – ENI 001.181.00 Power supply 12 – 30 VDC RS485 serial port communication Metrological data Product Level / mm Interface Level / mm (water presence detection) Product average temperature up to max. 5 temp. sensors Temperature accuracy in range -20 ÷ +50 °C: ± 0,2 °C Standard Version: Measuring probe accuracy: ± 0,5 mm Real probe resolution: ± 0,05 mm Plus Version: Measuring probe accuracy: ± 0,25 mm Real probe resolution: ± 0,01 mm North Falcon NF ExD/SS - wired magnetostrictive explosion-proof level gauge # General features The magnetostrictive level probe bases his physical phenomena on the Wiedemann effect. The main features are: Very high accuracy and repeatability Reliability and robustness Sharp leakage control Full stainless steel execution Ultra compact design Commonly used in the fuel level control, it allows the measure of the three essential parameters: Fuel level Water level on the bottom of the tank Fuel temperature The magnetostrictive sensor measures with an high resolution of 0,01 mm and a final accuracy of 0,25 mm on the full scale range (Plus version only). Measuring length of the NF rigid pipe, range from 0,4 m up to 5,5 m Measuring length of the NF flexible pipe, range from 5,5 m up to 15 m Mechanical characteristics Stainless steel AISI 305 and Delrin enclosure, external diameter Ø 42 mm IP 68 Protection up to 10 m/24h water submersion Tank connection: in riser, threaded or flanged Stainless steel pipe AISI 304 / 316 Ø 14.0 mm N. 2 INOX AISI 316 / NBR floats Ø 42 / 52 mm Electrical features Intrinsically safe construction for installation in classified 0 zone Integrated battery and antenna Power supply: intrinsically safe lithium battery Metrological data Product Level / mm Interface Level / mm (water presence detection) Product average temperature up to max. 5 temp. sensors Measuring probe accuracy: ± 0,5 mm Real probe resolution: ± 0,05 mm Temperature accuracy in range -20 ÷ +50 °C: ± 0,2 °C More information: https://www.technotrade.ua/north-falcon-probes.html